新闻和报道

Wolfertschwenden, 25 September 2019 - This year the German Packaging Award in the packaging machine category goes to    MULTIVAC. The innovative TX 710 traysealer convinced the jury not just because of its outstanding performance, reliability and flexibility, but also in view of its cost-effectiveness and the fact that…

Wolfertschwenden, 24 September 2019 - As part of a press conference at FachPack, Hans-Joachim Boekstegers, Director and CEO of MULTIVAC, today gave an overview of the current development of the business, as well as the packaging trends at MULTIVAC and just some of the company's many product innovations on the…

Wolfertschwenden, 12 August 2019 - At FachPack 2019 MULTIVAC will be presenting a new generation of cross web labellers. In addition to improved performance and operating reliability, one of the features of the new models compared to the previous labelling solutions are their lower life cycle costs. The use of…

Wolfertschwenden, 29 July 2019 – After more than 18 years as CEO of the MULTIVAC Group, Hans-Joachim Boekstegers will hand over the business on 1 January 2020 to his director colleagues, Christian Traumann and Guido Spix, and bow out of the company. Mr Traumann and Mr Spix will manage the company jointly in future.

Hans…

Wolfertschwenden, 23 July 2019 - At FachPack 2019 MULTIVAC will be showing a number of forward-looking innovations from its various business units. The exhibits include the new X-line machine generation, which will be presented at the trade fair in the form of the RX 4.0 thermoforming packaging machine and the TX 710…

Wolfertschwenden, 03 July 2019 - MULTIVAC takes over the FRITSCH Group and further expands its range of solutions for the bakery industry.

FRITSCH is a leading manufacturer of bakery equipment with its headquarters in the town of Markt Einersheim in Lower Franconia. The product range consists of high-performance…

Wolfertschwenden/Bruckmühl, 20 May 2019 - As part of an official celebration, the first spadeful of earth was turned today for the construction of a new factory at TVI Entwicklung und Produktion GmbH in Bruckmühl. A state-of-the-art complex covering around 9,000 square metres of available space will be built there, and…

“Contrary to the general market trend, our business continues to develop relatively well,” explained Hans-Joachim Boekstegers. “We are seeing very positive development in all the company's business units, and our production capacity is fully utilised. With a turnover of around 1.1 billion euros, the MULTIVAC Group was…

Hannover, Germany — April 2, 2019 — At Hannover Messe 2019, European companies from the mechanical engineering, industrial automation and software industries are driving the foundation of the Open Industry 4.0 Alliance with a cooperation agreement. Founding members include Beckhoff, Endress+Hauser Group, Hilscher, ifm,…

Wolfertschwenden, 12 March 2019 – In February MULTIVAC signed an investment agreement to establish a new production company in Taicang in China. The new production facility will enable MULTIVAC in future to react to the requirements of customers in China with even greater speed and focus. The production of packaging…

Enger, 28 January 2019 – MULTIVAC Marking & Inspection is today among the leading manufacturers of innovative labelling, marking and inspection solutions. The company has been part of the MULTIVAC Group since 1993. As part of a strategic realignment, there was a change of personnel in the company management in January.…

Enger, 10 December 2018 - Last Friday MULTIVAC Marking & Inspection inaugurated a new production and office building during a celebratory opening ceremony - and at the same time it celebrated 25 years as part of the MULTIVAC Group. The official speakers included Christian Traumann, Director and CFO of MULTIVAC, Volker…

Wolfertschwenden, 28 September 2018 – As part of an official ceremony, the Directors of MULTIVAC Hans-Joachim Boekstegers (CEO), Guido Spix (CTO and COO) and Christian Traumann (CFO) today turned the first spadeful of earth for the construction of a new building complex in Wolfertschwenden. It is intended primarily for…

Wolfertschwenden/ Nuremberg, 26 September 2018 - As part of a press breakfast at FachPack, Hans-Joachim Boekstegers, Director and CEO of MULTIVAC, gave an overview of the current development of the business as well as the packaging trends at MULTIVAC and the company's product highlights on the exhibition stand.

“Contr…

MULTIVAC is expanding its printer portfolio with the addition of a versatile thermal inkjet printer
Enger, 17 September 2018 – For the first time starting in March 2019, MULTIVAC will be offering a MULTIVAC TIJ printer in addition to TTO printers. It will be able to be used in direct web printers as well as in label…

Enger, 13. August 2018 – Last year MULTIVAC Marking & Inspection launched the DP 230, the first model in a new generation of direct web printers, for integrating into R 08x and R 1xx thermoforming packaging machines. From the 4th quarter of 2018 onwards, the new models of direct web printers will also be available for…

Wolfertschwenden, 31. July 2018 - At FachPack 2018 MULTIVAC will be presenting an innovative concept for packing medical and pharmaceutical products, where the main feature is the easy removal of the product thanks to a novel opening aid. In addition to this, a packaging line with automatic syringe infeed will be…

Wolfertschwenden, 11. July 2018 - From 25 to 27 September MULTIVAC will be presenting at FachPack 2018 in Nuremberg a complete range of solutions for packing food and non-food products. A major focus at the trade fair will be on the presentation of packaging concepts, which meet the growing requirement for ease of…

Vejle, d. 11. juli 2018 – På Fachpack i Nürnberg i dagene 25.27. september præsenterer MULTIVAC et komplet program af pakkeløsninger til fødevarer og nonfood produkter. I fokus er pakkekoncepter, der imødekommer de stigende krav til let genbrug og ressourcebesparelser. MULTIVAC viser en R 105 MF skinpakningsmaskine og…

Wolfertschwenden, Germany / Bozhurishte, Bulgaria, 7 June 2018 – Yesterday, the new production plant of MULTIVAC Bulgaria Production Ltd was inaugurated in Bozhurishte, near Sofia, with a festive opening ceremony. The guests included Boyko Borissov, Prime Minister of Bulgaria, Emil Karanikolov, Minister of Economy of…

Enger, 23 May 2018 – With its I 410 model MULTIVAC Marking & Inspection offers an automatic inspection solution, which is precise, fast and consistently reliable. Thanks to its high-resolution and height-adjustable line scanners as well as its powerful image processing, it ensures that reliable marking and quality…

Wolfertschwenden, 14 February 2018 – Christian Traumann, Director and Group CFO of MULTIVAC, has been elected as President of interpack 2020 by the constituent assembly of the Trade Fair Advisory Council. Christian Traumann has already held the position of interpack President in 2011 as well as Vice President for the…

Wolfertschwenden, 18. January 2018 – The X-line, a new generation of thermoforming packaging machines, has been given the Gold International FoodTec Award 2018. The thermoforming packaging machine sets a new benchmark in the market thanks to its range of innovative technology. As a result of its seamless…

Enger, 18 October 2017 – With its DP 230 direct web printer, MULTIVAC Marking & Inspection has brought the first model of its new generation of direct web printers onto the market. The space-saving and hygienic solution, which is very flexible in its use, complements the comprehensive range of existing products with a…

Enger, 9 October 2017 – MULTIVAC Marking & Inspection has expanded its product range with the addition of a new, network-enabled thermal transfer printer. As a cost-effective and highly flexible marking solution, the compact TTO 06 is suitable for narrow print widths in a wide range of applications.

With a print…

Enger, 24 August 2017 – The production capacity of MULTIVAC Marking & Inspection in Enger is to be expanded with a modern extension to the production hall – and this will also enable the logistics and assembly processes to be optimised. The building work has already begun, and the planned date for putting the new…

“We greatly regret this step but are also very grateful to him for supporting us in recent months in implementing the smooth transition of TVI into the MULTIVAC Group. Mr Anton relinquished the company management in May 2017,” says Christian Traumann, Director and Group CFO of MULTIVAC.

It has been possible to appoint…

The number of employees in the Group increased to 5,065 worldwide, while the turnover in 2016 rose to 952 million euros, a 7.1 percent increase over the previous year. The German part of the Group achieved a turnover of 395 million euros in 2016, which equates to an increase of 7.0 percent over 2015.

Investment

“We are…

MULTIVAC Pack Pilot enables the machine to be set up to the optimum level using machine control support. When new recipes are created, the machine parameterises itself to the optimum operating point, using the die set data and the features for pack, product and packaging material that have been selected. This means…

Meyn is the market leader in complete solutions for poultry processing with solutions, which range from live bird arrival to packing. The company plans and completes whole factories – for all processing stages from the delivery of the living birds through to the dispatch of the packed products ready for sale.…

The innovative solution from MULTIVAC enables even small businesses or companies, for which the systems available up to now on the market have not represented an economically viable solution, to produce portion packs such as jams, salad dressings and sauces very cost-effectively and highly efficiently.

Thanks to short…

Thanks to visual inspection systems that can be integrated seamlessly into packaging lines, automated quality control can be performed reliably even at high output. In the light of more exacting legal requirements and greater liability risks, food-processing companies are faced with the task of making the labelling of…

A standard cycle output of 25 cycles and a standard operating range of 200 by 800 mm - which can be extended as an option if required - make the H 052 a versatile automation module within the packaging line.

The propulsion unit, which is equipped with dynamic linear motors, brings products of up to four kilos in…

In the presence of government officials and local politicians, including Mr. Lyuben Petrov, Deputy Minister of Economics, Georgi Dimov, Mayor of Bozhurishte Municipality and Doncho Barbalov, Deputy Mayor for Investments and Building of Sofia Municipality, and, additionally, representatives of the Agency for Investment…

為不同的產品貼標識

MULTIVAC 公司「標記和檢測」部門向大家展示了皮帶輸送機貼標機 L 310，這是一種性能強大並且非常靈活的系統，其專用於為不同的產品和包裝貼標識，例如：託盤，紙箱，杯子和熱成型包裝。這種模組化架構在產品處理，印製和檢測方面有很多選項，從而可以在技術和經濟性方面依照不同的產品和標記任務進行最佳調整。能夠在最高功率範圍內實現不間斷貼標，L 310 配備了零停機功能。

此外，本次展會上還推出了一種標識分配器，其可以集成到生產，填充和包裝生產線中，例如：筒形袋機器。線上貼標機因為具有緊湊的架構形式和靈活的支援系統，故此能在生產環境中實現最佳調整。諸如 USB，乙太網，EtherCAT或 CAN…

MULTIVAC 公司向大家展示了熱成型包裝機 R 105 MF 這種生產高品質MultiFresh™ 真空貼體包裝的入門機型。不同之處在於，R 245 配備了模具更換和薄膜迅速更換系統，在高產的前提下確保最大程度的靈活性，並能迅速改裝為其他包裝規格。為了對包裝進行標識，這種高性能機器配備了一台薄膜直接印製系統和兩台帶熱轉印機的橫向片材網格貼標機。由一台型錄為 I 211 的檢查用天平秤對包裝進行重量檢查。在封裝過程結束後透過一個集成的皮帶系統 MBS 100 對包裝進行分離。

MULTIVAC 公司還向大家介紹了一種隸屬於託盤密封機產品系列的半自行裝置 T 250，其能夠實現有效和靈活的小批量包裝。這種緊湊型機器適合生產 MAP 和…

The project is very important for the region. The density of coverage by doctors in Uganda is low, and the medical provision in the countryside is a long way from being adequate. The construction of the healthcare center is of particular help to children, women and elderly people, who can not afford medical treatment.…

The solution comprises five high-performance components: the sausages are transported via an inclined conveyor to the centrifuge plate that is constantly turning.  There they are orientated at the outside edge of the plate by the centrifugal force and are taken up individually from the centrifuge ring. Then a V…

MULTIVAC's figures can be clearly seen: the Group's turnover in 2015 was some 900 million euros. This equates to an increase of over 19 percent compared with the previous year. There are now 1,900 employees at its headquarters in Wolfertschwenden, and worldwide there are 5,100. With its own more than 80 sales and…

全新的模具方案具有适用于模具中所有流程的特点，不会限制全尺寸模板使用。 其中包括加热紧缩薄膜。 通过这种可控路程，能够保证超高的包装质量。 对于模板更换，只需更换模具和夹爪，同时降低机器停机时间至最低。 同样可在托盘封口机上生产MAP包装或无气氛交换的包装。

高性能托盘封口机T 800适用于大批量包装，可两侧操作，能够集成至自动化包装线。 IFFA上展出的T 800是自动包装机的组成部分。 它由配有托盘跟踪、传送带的拆包机、金属探测器、传送带贴标机 L 310（用于上下贴标）以及处理模块H 130组成。
MULTIVAC另外在IFFA展出更多自动化托盘封口机生产线产品和装载装置，如多头秤分配包装系统或不同注入器。
里脊肉、牛排、肉末、汉堡…

此款来自BASELINE系列的机器，性价比极高，能始终如一地生产公认的莫迪维克高品质真空袋装包装。相比C系列真空腔式包装机，P 650 提供了有限的设备配套装置选择以及简化的控制系统。

P 650单个腔室尺寸达850 x 850 x 250毫米（宽x深x高），特别适合包装鲜肉制品、奶酪块或轮状奶酪等大体积食品。它的2个腔室均前后配置2道850毫米长的可插式密封条。此外，该设备也配备用于清除废边的双封条封口分离切割装置，也可采用定位板对包装的封口高度根据产品进行最佳调整。

此款紧凑型机器将加速包装流程。其同步化的生产加工流程意味着，当一个腔室产品正在抽真空的同时，可在另外一个腔室内对产品进行装填，从而使得该机器使用期间不存在任何制约因素。…

凭借多媒体信息，例如：设备和包装范例的 3D 视图和影像，这套全新的网站还可以提供比包装行业专家更为详尽的信息。而且，用户还可以通过提供光学彩色条码支持的行业过滤器程序，有针对性地选取与其行业有关的内容。这样就能够只显示例如：食品行业、医药和制药行业或工业产品行业的应用和设备。此外，全新的网站还链接了 MULTIVAC 客户杂志更新网络版。

特别是，网站访问的用户友好程度和清晰的层次安排，对于全新的设计起到了关键性的作用。“现在越来越多的人使用移动终端设备访问互联网”，Dominik Rotter 解释道，他是 MULTIVAC…

热转印打印机因其优越的打印质量以及高度灵活的打印布局而见长，因此，随着标签上信息内容与日俱增，该机器特别适用于满足不断增长的产品贴标需求。这表现在，首先，食品信息法规要求产品提供比以往更多的关于食品营养价值的详细信息；其次，标签上以多语种信息展示的需求也与日俱增；再者，消费者通过智能手机扫描二维码获悉更多产品信息（如肉类和香肠产品的原产地）的方式也变得日益流行。

众所周知，在食品加工行业的低温环境中，热转印打印机无法以其最快的打印速度运转，这严重影响了贴标机的周期性输出，针对以上情况，莫迪维克开发了加速组件，此组件由一个伺服驱动标签前进器和一个标签缓冲器组成，其中预打印的标签可暂时缓冲。

该加速组件将贴标流程从打印流程中解耦，这意味着当…

此项投资旨在通过将操作流程集中化，进而优化莫迪维克17个欧洲子公司的备件供应。同时，日后在总部沃尔费尔茨希文登机器生产所需部件、材料等也将由此物流中心供应。

“新的物流中心将应用现代仓储技术，如自动化的备件仓库以及半自动化的堆高机等，在大大提高我们订单分拣效率的同时，有效地降低失误率。总的来说，新技术的应用使得我们能更好的规范操作流程。”莫迪维克高级物流总监Volker Starrach解释道。“未来，我们的客户将获益于更强的备件供应能力以及更短的供货时间。此外，各个流程阶段可能发生的错误也得以避免和减少。”

在2015年，莫迪维克进一步强化了其市场地位，集团营业额有望在今年年底突破800亿欧元。“如果单单是从各区域的发展状况来看，莫迪维克在欧洲，尤其是在德国和美国发展十分迅猛。”Hans-Joachim Boekstegers解释道。“同时，我们也发现莫迪维克在巴西和中国等国家的发展态势同样十分鼓舞人心。总的来说，我们观察到市场发展呈现一种由欧洲、美国向亚洲、南美和非洲缓慢转移的趋势。”

莫迪维克正在就扩大生产产能和服务范围进行系统投资：除了正在德国总部沃尔费尔茨希文登建设的计划于2016年投入运营的新物流中心之外，…

When setting up and operating a labeller, situations occur in which labels are not supposed to be dispensed. This is, for example, the case when the length of the label is determined by means of a measurement run, in the event of a change of label or when there are still labels with the print data for a preceding batch…